Tips for Curtain Installation and FixingTips for Curtain Installation and Fixing
Curtains are an easy way to add color, texture, and drama to your space. They can also help you control the amount of light that enters your room and keep out unwanted eyes. They also make your windows appear larger. However, hanging curtains isn't always a breeze.
Fixing a Rod
One of the most common ways to hang curtains is by using a curtain rod. These are easy to install, and can be used with both sheers and heavier fabrics.
The first step in hanging a curtain rod is to measure the window width. Once you have that number, add 1-3 inches on each side to get the total length of the rod. Then, mark a spot 4 inches above the window for the brackets.
If you're installing the rod on drywall, use wall anchors for a secure Curtain Installation and Fixing. Then, drill the holes for each bracket and screw them in place. If you're drilling on a stud, use a stud finder to make sure that the brackets line up with studs in the wall.
Tap-In Brackets
If your walls aren't framed with drywall, tap-in curtain rod brackets are a great alternative to traditional screws. These brackets are screwed into the top of the window trim, creating small holes that won't be seen by anyone but you.
After you've measured and marked the spots for your brackets, pre-drill the holes. You can use a drill to make sure they're level, but it's better to check them with a carpenter's level or other tool.
You can also use adhesive hooks to hold your rod up on the wall. These hooks are easy to install, and come in different weight capacities, so you'll want to buy the ones that are best for the weight of your curtains and rod.
A self-adhesive pleated shade is another quick option Curtain Installation and Fixing. They're especially helpful for rooms where you need to keep the sun out but want to let in natural light. They're also a good choice for apartments or houses with tight ceilings and can easily be removed for cleaning.
DIY a Rod
If you have a metal conduit or PVC pipe, you can turn it into a curtain rod with hardware to attach to the wall. These are a lot cheaper than buying a rod, and you can paint them any color.
For a more rustic look, you can also make a rod out of wood dowels. If you do this, be sure to make the ends of the dowels long enough to fit over a pair of finials. Then, force the finials onto the dowels, and let the glue dry for an hour before you mount your rod on the brackets.
Alternatively, you can make a rod out of PVC pipe or metal conduit from a do-it-yourself home store. They're a lot cheaper than buying a rod, but they won't be as sturdy as the real thing.
You can also make a DIY window panel by using two curtain rods and magnets to hold them together. These are especially popular for french doors and sidelights.
Comments
Post a Comment